Starting & Stopping a Recording

Procedure

1. Open the Shirt and apply a nickel-sized amount of cream to each bronze patch
2. Put on the Shirt and zip up the Shirt
3. The zipper tab must point downward to prevent the Shirt from unzipping
   
4. Connect the two (2) Shirt Belt Connectors using the male and female connectors
   
5. Tighten the Belts for a snug fit. The Shirt needs to be snug on your body to collect the best cardiac data. 
6. Unzip the Side Pocket and remove the Shirt Connector
7. Connect the Shirt Recorder to the Recorder using the Connector Port
8. Check the Status Light for a GREEN light meaning the sensors are working and your are recording data
9. The Status Light will turn off after 30 seconds to save battery
10. Insert the Recorder into the Side Pocket and secure the Recorder using the elastics in the left or right side of the Pocket.
11. The Recorder lights must face away from the body so you can push the Button and check the Status Light.
12. Zip up the Side Pocket once the Recorder is secure and you're all set!
    
    

Objective

To stop a recording session with the HMS Shirt and Recorder

Procedure

1. Unzip the Side Pocket
2. Remove the Recorder
3. Unplug the Shirt Connector
   
4. Replace the Shirt Connector and zip up the Side Pocket
5. Disconnect the two (2) Shirt Belt Connectors
   
6. Loosen the Shirt Belt Adjusters
7. Unzip and remove the Shirt
8. Hang to dry until next use or clean shirt